Products

Search


 

1-800-631-0728
Fax: 201-670-0033
 query@falcon-metals.com

Request a Quote

AISI 4130 Alloy Steel (UNS G41300)

AISI 4130 Alloy Steel (UNS G41300) Image

Alloy steels are designated by AISI four-digit numbers. They are more responsive to mechanical and heat treatments than carbon steels. They comprise different types of steels with compositions which exceed the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va in the carbon steels.

AISI 4130 alloy steel contains chromium and molybdenum as strengthening agents. It has low carbon content, and hence it can be welded easily. The datasheet given below provides more details about AISI 4130 alloy steel.

MACHINABILITY RATINGS

APPROXIMATE SURF. FT. PER MIN.

65

Percent RELATIVE SPEED

BASED ON C-1212 as 100 Percent

40

Category::

Alloy Steel Grades

Welding:

Welding of AISI 4130 steel can be performed by all commercial methods.

Heat Treatment:

AISI 4130 steel is heated at 871°C (1600°F) and then quenched in oil. This steel is usually heat-treated at temperatures ranging from 899 to 927°C (1650 to 1700°F).

Forging:

Forging of AISI 4130 steel can be performed at 954 to 1204°C (1750 to 2200°F).

Hot Working:

Hot working of AISI 4130 steel can be done at 816 to 1093°C (1500 to 2000°F).

Cold Working:

AISI 4130 steel can be cold worked using conventional methods.

Annealing:

Forming of AISI 4130 steel can be performed in the annealed condition.

Tempering:

Tempering of AISI 4130 steel can be performed at 399 to 566°C (750 to 1050°F), depending on the desired strength level.

Density:

0.284 lb/in³

Thermal Properties:

296 BTU in/hr.ft2. °F

Forming:

Forming of AISI 4130 steel can be performed in the annealed condition.

Mechanical Properties:

Mechanical Properties The mechanical properties of AISI 4130 alloy steel are outlined in the following table.

Properties Imperial
Tensile strength, ultimate 81200 psi
Tensile strength, yield 66700 psi
Modulus of elasticity 27557-30458 ksi
Bulk modulus (Typical for steel) 20300 ksi
Shear modulus (Typical for steel) 11600 ksi
Poissons ratio 0.27-0.30
Elongation at break (in 50 mm) 21.50%
Reduction of area 59.60%
Hardness, Brinell 217
Hardness, Knoop (Converted from Brinell hardness) 240
Hardness, Rockwell B (Converted from Brinell hardness) 95
Hardness, Rockwell C (Converted from Brinell hardness, value below normal HRC range, for comparison purposes only.) 17
Hardness, Vickers (Converted from Brinell hardness) 228
Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.) 70

 

Chemical Composition:

Chemical Composition The chemical composition of AISI 4130 alloy steel is listed in the following table.

Element Content (%)
Iron, Fe 97.03 – 98.22
Chromium, Cr 0.80 – 1.10
Manganese, Mn 0.40 – 0.60
Carbon, C 0.280 – 0.330
Silicon, Si 0.15 – 0.30
Molybdenum, Mo 0.15 – 0.25
Sulfur, S 0.040
Phosphorous, P 0.035

 

Inventory:

In Stock

Other Designations:

AMS 6348 AMS 6371 ASTM A331 ASTM A829 DIN 1.7218
AMS 6350 AMS 6373 ASTM A506 MIL S-18729 UNI 25 CrMo 4
AMS 6351 AMS 6374 ASTM A507 MIL S-6758 JIS SCCrM 1
AMS 6360 AMS 6528 ASTM A513 SAE J1397 JIS SCM 2
AMS 6361 AMS 7496 ASTM A519 SAE J404 SS 2225
AMS 6362 ASTM A29 ASTM A646 SAE J412 B.S. CDS 110
AMS 6370 ASTM A322 ASTM A752 AFNOR 25 CD 4 (S) SAE J770

 

Hardening:

Hardening of AISI 4130 steel can be done with cold working or heat treatment.

Melting Point:

2610°F

Applications:

The following are some of the major applications of AISI 4130 alloy steel: Aircraft engine mounts Welded tubing

Machinability:

AISI 4130 steel can be easily machined using conventional methods. However, machining becomes difficult when the hardness of the steel is increased.

 

Category::
Alloy Steel Grades

Send a Message

Your Name (required)

Company Name (required)

Your Email (required)

Phone Number(required)

Street Address (required)

Apartment, Suite or other

City (required)

State (required)

Zip (required)

Inquiry Product Name

Please describe what your metal needs are:

AISI 4130 Alloy Steel (UNS G41300)

AISI 4130 Alloy Steel (UNS G41300) Image

Alloy steels are designated by AISI four-digit numbers. They are more responsive to mechanical and heat treatments than carbon steels. They comprise different types of steels with compositions which exceed the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va in the carbon steels.

AISI 4130 alloy steel contains chromium and molybdenum as strengthening agents. It has low carbon content, and hence it can be welded easily. The datasheet given below provides more details about AISI 4130 alloy steel.

MACHINABILITY RATINGS

APPROXIMATE SURF. FT. PER MIN.

65

Percent RELATIVE SPEED

BASED ON C-1212 as 100 Percent

40

Category::

Alloy Steel Grades

Welding:

Welding of AISI 4130 steel can be performed by all commercial methods.

Heat Treatment:

AISI 4130 steel is heated at 871°C (1600°F) and then quenched in oil. This steel is usually heat-treated at temperatures ranging from 899 to 927°C (1650 to 1700°F).

Forging:

Forging of AISI 4130 steel can be performed at 954 to 1204°C (1750 to 2200°F).

Hot Working:

Hot working of AISI 4130 steel can be done at 816 to 1093°C (1500 to 2000°F).

Cold Working:

AISI 4130 steel can be cold worked using conventional methods.

Annealing:

Forming of AISI 4130 steel can be performed in the annealed condition.

Tempering:

Tempering of AISI 4130 steel can be performed at 399 to 566°C (750 to 1050°F), depending on the desired strength level.

Density:

0.284 lb/in³

Thermal Properties:

296 BTU in/hr.ft2. °F

Forming:

Forming of AISI 4130 steel can be performed in the annealed condition.

Mechanical Properties:

Mechanical Properties The mechanical properties of AISI 4130 alloy steel are outlined in the following table.

Properties Imperial
Tensile strength, ultimate 81200 psi
Tensile strength, yield 66700 psi
Modulus of elasticity 27557-30458 ksi
Bulk modulus (Typical for steel) 20300 ksi
Shear modulus (Typical for steel) 11600 ksi
Poissons ratio 0.27-0.30
Elongation at break (in 50 mm) 21.50%
Reduction of area 59.60%
Hardness, Brinell 217
Hardness, Knoop (Converted from Brinell hardness) 240
Hardness, Rockwell B (Converted from Brinell hardness) 95
Hardness, Rockwell C (Converted from Brinell hardness, value below normal HRC range, for comparison purposes only.) 17
Hardness, Vickers (Converted from Brinell hardness) 228
Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.) 70

 

Chemical Composition:

Chemical Composition The chemical composition of AISI 4130 alloy steel is listed in the following table.

Element Content (%)
Iron, Fe 97.03 – 98.22
Chromium, Cr 0.80 – 1.10
Manganese, Mn 0.40 – 0.60
Carbon, C 0.280 – 0.330
Silicon, Si 0.15 – 0.30
Molybdenum, Mo 0.15 – 0.25
Sulfur, S 0.040
Phosphorous, P 0.035

 

Inventory:

In Stock

Other Designations:

AMS 6348 AMS 6371 ASTM A331 ASTM A829 DIN 1.7218
AMS 6350 AMS 6373 ASTM A506 MIL S-18729 UNI 25 CrMo 4
AMS 6351 AMS 6374 ASTM A507 MIL S-6758 JIS SCCrM 1
AMS 6360 AMS 6528 ASTM A513 SAE J1397 JIS SCM 2
AMS 6361 AMS 7496 ASTM A519 SAE J404 SS 2225
AMS 6362 ASTM A29 ASTM A646 SAE J412 B.S. CDS 110
AMS 6370 ASTM A322 ASTM A752 AFNOR 25 CD 4 (S) SAE J770

 

Hardening:

Hardening of AISI 4130 steel can be done with cold working or heat treatment.

Melting Point:

2610°F

Applications:

The following are some of the major applications of AISI 4130 alloy steel: Aircraft engine mounts Welded tubing

Machinability:

AISI 4130 steel can be easily machined using conventional methods. However, machining becomes difficult when the hardness of the steel is increased.