Products

Search


 

1-800-631-0728
Fax: 201-670-0033
 query@falcon-metals.com

Request a Quote

AISI 6150 Alloy Steel (UNS G61500)

AISI 6150 Alloy Steel (UNS G61500) Image

Alloy steels are designated by AISI four-digit numbers. They are more susceptible to mechanical and heat treatments than carbon steels. They comprise different types of steels with compositions which exceed the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va in the carbon steels.

The datasheet given below provides more details about AISI 6150 alloy steel.

MACHINABILITY RATINGS

APPROXIMATE SURF. FT. PER MIN.

100

Percent RELATIVE SPEED BASED ON C-1212 as 100 Percent

60

 

If you need more details about this product or would like to place an order, please call us!

CALL US NOW
1-800-631-0728
Category::
Alloy Steel Grades
Annealing:
AISI 6150 alloy steel is annealed at 843°C (1550°F) and then air cooled.
Chemical Composition:
Chemical Composition The chemical composition of AISI 6150 alloy steel is listed in the following table.
Element Content (%)
Iron, Fe 97.095 - 97.72
Chromium, Cr 0.800 - 1.10
Manganese, Mn 0.7 - 0.9
Carbon, C 0.480 - 0.530
Silicon, Si 0.150 - 0.3
Vanadium, V ≥ 0.150
Sulfur, S ≤ 0.04
Phosphorous, P ≤ 0.0350

Hot Working:

Cold Working:

Density:
0.284 lb/in³
Thermal Properties:
323 BTU in/hr.ft2. °F
Forming:

Welding:
AISI 6150 alloy steel can be welded using any common welding methods. However, preheating and post weld stress relieving have to performed for welding this steel.
Heat Treatment:
AISI 6150 alloy steel is hardened at 871°C (1600°F). This steel is tempered followed by normalizing at 899°C (1650°F) and then air cooled.
Forging:
Forging of 6150 alloy steel is performed at 1204°C (2200°F).
Mechanical Properties:
Mechanical Properties The mechanical properties of AISI 6150 alloy steel are outlined in the following table.
Properties Imperial
Tensile strength, ultimate 97200 psi
Tensile strength, yield 60200 psi
Izod impact 19.9 ft-lb
Modulus of elasticity 27557-30458 ksi
Shear modulus (typical for steel) 11600 ksi
Bulk modulus (typical for steel) 20300 ksi
Poissons ratio (calculated) 0.27-0.30
Elongation at break (in 50 mm) 23%
Hardness, Brinell 197
Hardness, Vickers (converted from Brinell hardness) 207
Hardness, Knoop (converted from Brinell hardness) 219
Hardness, Rockwell B (converted from Brinell hardness) 92
Hardness, Rockwell C (converted from Brinell hardness, value below normal HRC range, for comparison purposes only) 13
Machinability (annealed and cold drawn. Based on 100% machinability for AISI 1212 steel) 55

Inventory:
In Stock
Other Designations:
BAR/WIRE:  SHEET/STRIP:  PLATE:
AMS-6448 AMS-6450 ASTM-A 304 ASTM-A 322 MIL-S-8503 AMS-6455 AMS-6455
 TUBE:  PIPE: FORGINGS:
N/A N/A AMS-6448

Tempering:

Hardening:

Melting Point:

Applications:
The following are the major applications of 6150 alloy steel: Shafts Gears Pinions

Send a Message

Your Name (required)

Company Name (required)

Your Email (required)

Phone Number(required)

Street Address (required)

Apartment, Suite or other

City (required)

State (required)

Zip (required)

Inquiry Product Name

Please describe what your metal needs are:

AISI 6150 Alloy Steel (UNS G61500)

AISI 6150 Alloy Steel (UNS G61500) Image

Alloy steels are designated by AISI four-digit numbers. They are more susceptible to mechanical and heat treatments than carbon steels. They comprise different types of steels with compositions which exceed the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va in the carbon steels.

The datasheet given below provides more details about AISI 6150 alloy steel.

MACHINABILITY RATINGS

APPROXIMATE SURF. FT. PER MIN.

100

Percent RELATIVE SPEED BASED ON C-1212 as 100 Percent

60

 

If you need more details about this product or would like to place an order, please call us!

CALL US NOW
1-800-631-0728